office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

AZ200CC-T-1P2P

AZ 200

Producător: Schmersal Cod produs: 101182988 Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Thermoplastic enclosure
  • Max. length of the sensor chain 200 m
  • Self-monitoring series-wiring of 31 sensors
  • 3 LEDs to show operating conditions
  • Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
  • Intelligent diagnosis
  • Spring pulley connection

Caracteristici

Absicherung des Sicherheitsausganges:
short-circuit proof

Active principle:
Non-contact

Actuating speed, maximum:
0.2

Actuator monitored:
Yes

Ambient temperature, maximum:
70

Ambient temperature, minimum:
-25

Available until:
2020-12-31T00:00:00

Basic quantity unit:
Piece

Cable section, maximum:
1.5 mm²

Cable section, minimum:
0.25 mm²

Certificates:
cULus; TÜV; EAC

Control category to EN13849:
4

Current leakage:
0.5

Current, Utilisation category DC13:
0.05

Degree of pollution to VDE 0100:
3

Duration of risk, maximum:
120

EAN ( European Article Number):
4030661318608

EAN (European Article Number):
4030661318608

eCl@ss number, Version 9.0:
27-27-26-02

Electrical fuse rating:
short-circuit proof

Enclosure material:
Glass-fibre, reinforced thermoplastic

Ensured switch distance "OFF":
30

Ensured switch distance "ON":
4

EPLAN:
Yes

Fuse rating to UL 508, maximum:
4

Gross weight:
345.000

Height of sensor:
220

Hysteresis (Switch distance), maximum:
1.5

Included in delivery:
Actuators must be ordered separately.

Integral System Diagnostics, status :
Yes

Latching force:
30

Length of sensor:
50

Mechanical life, minimum:
1000000

Mission Time:
20

Net weight:
345.000

No-load current:
100

Note (Cable section):
All indications about the cable section are including the conductor ferrules.

Note (Delivery capacity):
Phased-out product

Note (LED switching conditions display):
Operating condition: LED green; Error / functional defect: LED red; Supply voltage: LED green

Note (Relative humidity):
non-condensing

Number of safety contacts:
2

Operating Current:
50

Overvoltage category:
III

Overvoltage category to VDE 0100:
3

Performance level, up to:
e

PFH-value:
0.000000004

Product group:
Initial

Product name:
AZ 200

Product type description:
AZ 200CC-T-1P2P

Protection class (Operating resource):
2

Protection rating:
II

Rated impulse withstand voltage:
0.8

Rated insulation voltage:
32 VDC

Rated operating current (safety outputs):
250

Rated operating voltage, maximum:
26.4 VDC

Rated operating voltage, minimum:
20.4 VDC

Reaction time, maximum:
60

Recommendation (actuator):
AZ/AZM 200-B1

Relative humidity, maximum:
95

Relative humidity, minimum:
30

Repeat accuracy R:
0.5

Resistance to vibrations to EN 60068-2-6:
10 … 55 Hz, amplitude 1 mm

Restistance to shock:
30 g / 11 ms

Safety Integrity Level (SIL), applicable for:
3

Series-wiring:
Yes

Short circuit detection:
Yes

Short-circuit recognition:
Yes

Standards:
IEC 61508

Storage and transport temperature, maximum:
85

Storage and transport temperature, minimum:
-25

Switch distance:
6.5

Switching frequency, approx.:
1

Switching thresholds of fail-safe inputs:
−3 V … 5 V (Low); 15 V … 30 V (High)

Terminal Connector:
Spring pulley connection

Time to readiness, maximum:
4000

Traceparts:
Yes

Traceparts, external ID:
69-07062010-118823

Traceparts, product ID:
33-22052019-077176

Versions:
p-type

Voltage drop Ud, maximum:
4

Voltage, Utilisation category DC13:
24

Width of sensor:
40

Wire cross-section, maximum:
15

Wire cross-section, minimum:
23

Safety-relevant key characteristics

Safety functions:
Yes

Housing

Weight:
345

ambient conditions

protection class:
IP 67 to IEC/EN 60529

Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii