office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

AZM 161CC-12/03RI-024-B1

AZM 161I-B1

Producător: Schmersal Cod produs: 101212388 Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Compact design
  • Interlock with protection against incorrect locking.
  • Individual coding
  • Coding level "High" according to ISO 14119
  • Double-insulated
  • High holding force
  • Long life
  • 130 mm x 90 mm x 30 mm
  • Particularly suitable for sliding doors
  • 1 Cable entry M 20 x 1.5
  • Cage clamps
  • Manual release from side

Caracteristici

Active principle:
electromechanical

Actuating radius, minimum:
150

Actuating speed, maximum:
2

Ambient temperature, maximum:
60

Ambient temperature, minimum:
-25

B10d Normally open contact (NO):
1000000

B10d Normally-closed contact (NC):
2000000

Basic quantity unit:
Piece

Cable section, maximum:
1 x 1.5 mm², flexible

Cable section, minimum:
1 x 0.25 mm²

Certificates:
CCC; cULus; EAC

Clamping force:
2000

Coding level according to ISO 14119:
High

Current, Utilisation category AC-15:
4

Current, Utilisation category DC13:
2.5

Delivery scope of Mounting material:
Tamperproof screws

EAN ( European Article Number):
4030661393728

EAN (European Article Number):
4030661393728

eCl@ss number, Version 9.0:
27-27-26-03

Electrical power consumption, maximum:
10

Enclosure material:
Glass-fibre, reinforced thermoplastic

general information:
Individual coding

Gross weight:
480.000

Height of sensor:
90

Included in delivery:
Slot sealing plugs

Latching force:
30

Length of sensor:
30

Manual release:
Yes

Material of the contacts, electrical:
Silver

Max. fuse rating:
6 A gG D-fuse to DIN EN 60269-1

Mechanical life, minimum:
1000000

Mission Time:
20

Net weight:
480.000

Note (applications):
sliding safety guard; removable guard; hinged safety guard

Note (Cable section):
All indications about the cable section are including the conductor ferrules.

Note (General):
The axis of the hinge must be 5 mm above and in a parallel plane to the top surface of the safety switch.; minimum actuating radius on hinged guards in line with the plane of the actuator 150 mm; minimum actuating radius on rotating guard systems via the narrow edge of the actuator 180 mm; The actuator is not available separately.

Note (Manual release):
For maintenance, installation, etc. ; For manual release using M5 triangular key, available as accessory

Number of actuating directions:
3

Number of auxiliary contacts:
1

Number of safety contacts:
5

Positive break force, minimum:
30

positive break travel:
10

Power to unlock:
Yes

Product group:
Initial

Product name:
AZM 161I

Product type description:
AZM 161CC-12/03RI-024-B1

Rated control voltage:
24

Rated impulse withstand voltage:
4

Rated insulation voltage:
250 V

Required rated short-circuit current to EN 60947-5-1:
1000

Standards:
ISO 13849-1

Switching element:
NO contact, NC contact

Switching principle:
Creep circuit element

Terminal Connector:
Cage clamps

Thermal test current:
6

Voltage, Utilisation category AC15:
230

Voltage, Utilisation category DC13:
24

Width of sensor:
130

electrical data

switching frequency:
1000

Housing

Weight:
480

ambient conditions

protection class:
IP 67 to IEC/EN 60529

Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii