Caracteristici
Active principle:
electromechanical
Actuating speed, maximum:
2
Actuator and interlock combined monitored:
Yes
Ambient temperature, maximum:
55
Ambient temperature, minimum:
-25
AS-i Current consumption, maximum:
100
AS-i Device protection:
Internal short-circuit proof
AS-i Input, Channel 1:
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2:
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Operating voltage AS-i maximum:
31.6
AS-i Operating voltage, minimum:
26.5
AS-i Outputs, DO 0:
Solenoid control
AS-i Outputs, DO 1:
No Function
AS-i Outputs, DO 2:
No Function
AS-i Outputs, DO 3:
No Function
AS-i Parameter bits, P0:
Safety guard and actuator detected
AS-i Parameter bits, P1:
Solenoid interlock locked
AS-i Parameter bits, P2:
No function
AS-i Parameter bits, P3:
No function
AS-i Specification:
Safety-Slave
Basic quantity unit:
Piece
Certificates:
cULus; TÜV; EAC; ASi-SaW
Control category to EN13849:
3
Degree of pollution to VDE 0100:
3
EAN ( European Article Number):
4030661390451
EAN (European Article Number):
4030661390451
eCl@ss number, Version 9.0:
27-27-26-03
Enclosure material:
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Included in delivery:
Actuators must be ordered separately.
Integral System Diagnostics, status :
Yes
Mechanical life, minimum:
1000000
Note (AS-i Parameter bits):
Set the parameter outputs to "1111" (0xF) ; FID: periphery error
Note (AS-i Input module address):
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Note (AS-i Operating voltage):
Protection against polarity reversal
Note (General):
Interlocks with the power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened.
Note (LED switching conditions display):
(1) LED green: Supply voltage; (3) LED yellow : Enabling status ; (2) red LED: Communication error / Slave address = 0
Note (PFH-value):
up to max. 100,000 switching cycles/year
Note (Relative humidity):
non-condensing; non-icing
Number of actuating directions:
2
Overvoltage category:
III
Overvoltage category to VDE 0100:
3
Performance level, up to:
d
Please note::
Einsetzbar wenn ein Fehlerausschluss für eine gefahrbringende Beschädigung der 1-kanaligen Mechanik zulässig ist und ein ausreichender Manipulationsschutz gewährleistet ist.
Product type description:
AZM 170 BZ ST-AS P
Protection class (Operating resource):
2
Rated impulse withstand voltage:
0.8
Rated insulation voltage:
32 VDC
Rated operating voltage:
24 VDC -15% / +10% (stabilised PELV)
Reaction time, maximum:
100
Relative humidity, maximum:
95
Relative humidity, minimum:
30
Safety Integrity Level (SIL), applicable for:
2
Storage and transport temperature, maximum:
85
Storage and transport temperature, minimum:
-25
Terminal Connector:
Connector plug M12, 4-pole, (A-coding)
Traceparts, external ID:
69-15022006-905849
Traceparts, product ID:
33-22052019-077198
Housing
ambient conditions
protection class:
IP 67 to IEC/EN 60529
