Caracteristici
Active principle:
inductive
Actuating speed, maximum:
0.2
Ambient temperature, maximum:
60
Ambient temperature, minimum:
-25
Available until:
2020-12-31T00:00:00
Basic quantity unit:
Piece
Certificates:
cULus; TÜV; EAC
Clamping force in accordance with ISO14119:
2000
Clamping force, maximum:
2600
Current, Utilisation category DC13:
0.05
Degree of pollution to VDE 0100:
3
Duration of risk, maximum:
120
EAN ( European Article Number):
4030661355641
EAN (European Article Number):
4030661355641
eCl@ss number, Version 9.0:
27-27-26-03
Electrical fuse rating:
short-circuit proof, p-type
Electrical fuse rating, maximum:
2
Enclosure material:
Glass-fibre, reinforced thermoplastic
Guard locking monitored:
Yes
Included in delivery:
Actuators must be ordered separately.; Triangular key for AZM 200
Integral System Diagnostics, status :
Yes
Mechanical life, minimum:
1000000
Note (Delivery capacity):
Phased-out product
Note (General):
As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened.
Note (LED switching conditions display):
Supply voltage UB: LED green; Operating condition: LED green; Error / functional defect: LED red
Note (Relative humidity):
non-condensing
Number of safety contacts:
2
Number of Series-wiring of sensors:
31
Operating voltage, maximum:
26.4
Operating voltage, minimum:
20.4
Overvoltage category:
III
Overvoltage category to VDE 0100:
3
Performance level, up to:
e
PIN 1:
A1 Supply voltage UB
PIN 4:
Y1 Safety output 1
PIN 5:
OUT serial diagnostic output
PIN 7:
Y2 Safety output 2
PIN 8:
IN serial diagnostic input
Product type description:
AZM 200ST2-T-SD2P
Protection class (Operating resource):
2
Rated impulse withstand voltage:
0.8
Rated insulation voltage:
32 VDC
Rated operating current (safety outputs):
250
Reaction time, maximum:
60
Recommendation (actuator):
AZ/AZM 200-B1
Relative humidity, maximum:
95
Relative humidity, minimum:
30
Resistance to vibrations to EN 60068-2-6:
10 … 55 Hz, amplitude 1 mm
Restistance to shock:
30 g / 11 ms
Safety Integrity Level (SIL), applicable for:
3
Short circuit detection:
Yes
Short-circuit recognition:
Yes
Standards:
IEC 61508; IEC 60947-5-3
Storage and transport temperature, maximum:
85
Storage and transport temperature, minimum:
-25
Switching frequency, approx.:
1
Switching thresholds of fail-safe inputs:
−3 V … 5 V (Low); 15 V … 30 V (High)
Switching thresholds of magnet inputs:
-3 V … 5 V (Low); 15 V … 30 V (High)
Terminal Connector:
Connector M12, 8-pole
Time to readiness, maximum:
4000
Traceparts, external ID:
69-15022006-935635
Traceparts, product ID:
33-31052019-091719
Voltage drop Ud, maximum:
4
Voltage, Utilisation category DC13:
24
Safety-relevant key characteristics
Housing
ambient conditions
protection class:
IP 67 to IEC/EN 60529
