office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

BN 120L-RZ/V 2,0M

BN 120

Producător: Schmersal Cod produs: 101210882 Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Non-contact principle
  • Long life
  • Thermoplastic enclosure
  • Actuating distance up to 60 mm depending on actuating magnet and version
  • Design Ø 10.7 mm
  • with central mounting
  • With pre-wired cable
  • Actuation from front
  • with bias magnet

Caracteristici

Active principle:
Magnetic drive

Actuating element:
Magnet

Actuating panels:
front side

Actuating speed, maximum:
18

Ambient temperature, maximum:
70

Ambient temperature, minimum:
-25

Basic quantity unit:
Piece

bias magnet :
Yes

Diameter of sensor:
10.7

EAN ( European Article Number):
4030661388434

EAN (European Article Number):
4030661388434

eCl@ss number, Version 9.0:
27-27-01-05

Enclosure material:
Glass-fibre, reinforced thermoplastic

Gross weight:
56.000

Housing construction form:
Cylinder, thread

Included in delivery:
Actuators must be ordered separately.

Latching:
Yes

Length of cable:
2

Length of sensor:
102

Material of the Cable mantle:
LiYY

Mechanical life, minimum:
10000000

Mounting:
central with threated flange M12 x 1

Net weight:
56.000

Note (General):
The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.; When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact.; The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm.

Notice (Switch distance Sn):
Actuating distance up to 45 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.

Number of cable wires with indication of cable cross-section:
2

Number of snap-in contacts:
1

Product group:
Initial

Product name:
BN 120L

Product type description:
BN 120L-RZ/V

Recommendation (actuator):
2x BP 10; BP 34; BP 20; BP 31; BP 11; BP 12; BP 21; BP 22 S; BP 22 N; BE 20

Recommendation (actuator, lift switchgear):
BP 10; BP 15; 2 x BP 10; BP 34

Repeat accuracy R:
0.25

Resistance to vibrations to EN 60068-2-6:
10 … 55 Hz, amplitude 1 mm

Restistance to shock:
30 g / 11 ms

Suitable for elevators:
Yes

Switch distance:
3 mm … 45 mm; 2 x BP 10 = 3 mm; BP 34 = 15 mm; BP 20 = 10 mm; BP 31 = 10 mm; BP 11 = 15 mm; BP 12 = 20 mm; BP 21 = 45 mm; BP 22 N = 35 mm; BP 22 S = 35 mm; BE 20 = 10 mm

Switching capacity, maximum:
30

Switching current, maximum:
1

Switching element:
bistable contact

Switching voltage, maximum:
200

Terminal Connector:
Cable

Tightening torque of nuts, maximum:
0.9

Versions:
Reed contacts

width across flats:
17

Wire cross-section:
0.25

Housing

Weight:
56

ambient conditions

protection class:
IP 67 to IEC/EN 60529

Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii