office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

BN 650-01Z

BN 650

Producător: Schmersal Cod produs: 101187280 Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Non-contact principle
  • Long life
  • Construction form Ø 13 mm
  • Thermoplastic enclosure
  • Actuating distance up to 60 mm depending on actuating magnet and version
  • with central mounting
  • With pre-wired cable
  • Actuation from side
  • with bias magnet

Caracteristici

Active principle:
Magnetic drive

Actuating element:
Magnet

Actuating panels:
lateral

Actuating speed, maximum:
18

Ambient temperature, maximum:
70

Ambient temperature, minimum:
-25

Basic quantity unit:
Piece

bias magnet :
Yes

Bounce duration, maximum:
0.15

Diameter of sensor:
13

EAN ( European Article Number):
4030661335629

EAN (European Article Number):
4030661335629

eCl@ss number, Version 9.0:
27-27-01-05

Enclosure material:
Glass-fibre, reinforced thermoplastic

Gross weight:
65.000

Housing construction form:
Cylinder smooth

Included in delivery:
Actuators must be ordered separately.

Length of cable:
1

Length of sensor:
103

Material of the Cable mantle:
LiYY

Mechanical life, minimum:
100000000

Mounting:
central with threated flange

Net weight:
65.000

Note (General):
The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.; When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N).; This does not apply to the bistable contact.

Notice (Switch distance Sn):
Actuating distance up to 50 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.

Number of cable wires with indication of cable cross-section:
2

Number of openers:
1

Product group:
Initial

Product name:
BN 650

Product type description:
BN 650-01Z

Recommendation (actuator):
BP 10; 2x BP 10; BP 15; 2x BP 15; 2x BP 15/2; BP 34; BP 20; BP 31; BP 11; BP 12; BP 21

Recommendation (actuator, lift switchgear):
2 x BP 15/2; BP 10; 2 x BP 15; BP 15; 2 x BP 10; BP 34

Repeat accuracy R:
0.25

Resistance to vibrations to EN 60068-2-6:
10 … 55 Hz, amplitude 1 mm

Restistance to shock:
30 g / 11 ms

Suitable for elevators:
Yes

Switch distance:
5 mm … 50 mm; BP 10 = 5 mm; 2 x BP 10 = 17 mm; BP 15 = 6 mm; 2 x BP 15 = 17 mm; 2 x BP 15/2 = 17 mm; BP 34 = 15 ... 20 mm; BP 20 = 20 mm; BP 31 = 20 mm; BP 11 = 20 mm; BP 12 = 10 ... 30 mm; BP 21 = 25 ... 50 mm

Switching capacity, maximum:
30

Switching current, maximum:
1

Switching element:
Opener (NC)

Switching frequency, maximum:
300

Switching voltage, maximum:
200

Terminal Connector:
Cable

Versions:
Reed contacts

Wire cross-section:
0.25

electrical data

switching frequency:
1080000

Housing

Weight:
65

ambient conditions

protection class:
IP 67 to IEC/EN 60529

Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii