office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

BNS-B20 -12ZG-H

BNS-B20

Producător: Schmersal Cod produs: 101184134 Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Thermoplastic enclosure
  • Non-contact safety switch
  • Does not protrude into the door opening
  • 119,5 mm x 140 mm x 43,3 mm
  • Substitutes door-handle and safety switch, no further door fittings required
  • Modern and symmetric design
  • Tamper-proof because of integral coded safety sensor
  • Ergonomic operation
  • Suitable for hinged and sliding guards
  • No protruding actuator
  • Simple mounting with 4 Screws
  • Pre-wired cable

Caracteristici

Actuating element:
Magnet

Ambient temperature, maximum:
70

Ambient temperature, minimum:
-25

B10d- Value Normally-closed contact/Normally open contact (NC/NO:
25000000

Basic quantity unit:
Piece

Certificates:
cULus; TÜV; EAC

Coding:
Yes

Door weight, Hinged guard, maximal:
5

Door weight, Sliding guard, maximal:
3

EAN ( European Article Number):
4030661322070

EAN (European Article Number):
4030661322070

eCl@ss number, Version 9.0:
27-27-24-02

Enclosure material:
Glass-fibre, reinforced thermoplastic

Ensured switch distance "OFF":
22

Gross weight:
117.000

Height of sensor:
140

Included in delivery:
Actuators must be ordered separately.

Installation conditions (mechanical):
quasi-flush

Integral System Diagnostics, status :
Yes

Latching force:
100

Length of cable:
1

Length of sensor:
43.3

Material of the Cable mantle:
PVC

Mission Time:
20

Net weight:
117.000

Note (General):
Contact symbols shown for the closed condition of the guard device.; The contact configuration for versions with or without LED is identical.; Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit.

Note (Integral System Diagnostics, status ):
The LED is illuminated when the guard is closed.

Note (Wiring diagram):
Contact S21-S22 must be integrated in the safety circuit.

Number of cable wires:
6

Number of openers:
2

Number of safety contacts:
2

Number of shutters:
1

Product group:
Initial

Product name:
BNS-B20

Product type description:
BNS-B20 -12ZG-H

Recommendation (actuator):
BNS-B20-B01

Recommended safety switchgear:
SRB-E-301ST; SRB-E-201LC

Resistance to vibrations to EN 60068-2-6:
10 … 55 Hz, amplitude 1 mm

Restistance to shock:
30 g / 11 ms

Standards:
ISO 13849-1

Storage and transport temperature, maximum:
70

Storage and transport temperature, minimum:
-25

Switching capacity, maximum:
0.24

Switching current, maximum:
0.01

Switching frequency, maximum:
5

Switching voltage, maximum:
100

Terminal Connector:
Cable

Traceparts, external ID:
69-15022006-935452

Traceparts, product ID:
33-22052019-077587

Voltage type:
AC (alternating current); DC (direct current)

Width of sensor:
119.5

Wire cross-section:
0.25

Technical data

Cable entry:
rear

Housing

Weight:
117

ambient conditions

protection class:
IP67

Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii