Caracteristici
Actuating element:
Magnet
Ambient temperature, maximum:
70
Ambient temperature, minimum:
-25
B10d Normally-closed contact (NC):
25000000
Basic quantity unit:
Piece
Certificates:
cULus; TÜV; EAC
Direction of motion:
Head-on to the active surface
EAN ( European Article Number):
4030661321806
EAN (European Article Number):
4030661321806
eCl@ss number, Version 9.0:
27-27-24-02
Enclosure material:
Glass-fibre, reinforced thermoplastic
Ensured switch distance "OFF":
15
Ensured switch distance "ON":
5
Included in delivery:
Actuators must be ordered separately.
Installation conditions (mechanical):
quasi-flush
Integral System Diagnostics, status :
Yes
Note (General):
The number in brackets indicate the PIN number of the connector.
Note (Integral System Diagnostics, status ):
The LED is illuminated when the guard is closed.
Note (Wiring diagram):
The contacts S11-S12 and S21-S22 must be integrated in the safety circuit.
Notice (Switch distance Sn):
Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range.
Number of safety contacts:
2
Product type description:
BNS 260-02ZG-ST-L
Recommendation (actuator):
BPS 260
Recommended safety switchgear:
SRB-E-301ST; SRB-E-201LC
Resistance to vibrations to EN 60068-2-6:
10 … 55 Hz, amplitude 1 mm
Restistance to shock:
30 g / 11 ms
Storage and transport temperature, maximum:
70
Storage and transport temperature, minimum:
-25
Switching capacity, maximum:
0.24
Switching current, maximum:
0.01
Switching frequency, maximum:
5
Switching voltage, maximum:
24
Terminal Connector:
Connector M8
Traceparts, external ID:
69-05102007-016510
Traceparts, product ID:
33-22052019-081321
Voltage type:
DC (direct current)
Housing
ambient conditions
