Caracteristici
Active principle:
Magnetic drive
Actuating element:
Magnet
Ambient temperature, maximum:
60
Ambient temperature, minimum:
-25
AS-i Current consumption, maximum:
50
AS-i Device protection:
Internal short-circuit proof
AS-i Input, Channel 1:
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2:
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Operating voltage AS-i maximum:
31.6
AS-i Operating voltage, minimum:
18.0
AS-i Outputs, DO 0 … DO 3:
No Function
AS-i Parameter bits, P0 ... P3:
No function
AS-i Specification:
Safety-Slave
Basic quantity unit:
Piece
Certificates:
cULus; TÜV; EAC; ASi-SaW
Control category to EN13849:
4
Degree of pollution to VDE 0100:
3
Direction of motion:
Head-on to the active surface
EAN ( European Article Number):
4030661362236
EAN (European Article Number):
4030661362236
eCl@ss number, Version 9.0:
27-27-24-02
Enclosure material:
Glass-fibre, reinforced thermoplastic
Ensured switch distance "OFF":
17
Ensured switch distance "ON":
7
Included in delivery:
Actuators must be ordered separately.
Installation conditions (mechanical):
quasi-flush
Integral System Diagnostics, status :
Yes
Material of the Cable mantle:
LSYY
Note (AS-i Parameter bits):
Set the parameter outputs to "1111" (0xF)
Note (AS-i Input module address):
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Note (AS-i Operating voltage):
Protection against polarity reversal
Note (LED switching conditions display):
(1) LED green-red (AS-i Duo LED): Supply voltage / Communication error / Slave address = 0; (2) LED yellow: Enabling status
Note (PFH-value):
up to max. 500,000 switching cycles/year
Notice (Switch distance Sn):
Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range.
Number of cable wires with indication of cable cross-section:
2
Overvoltage category:
III
Overvoltage category to VDE 0100:
3
Performance level, up to:
e
Product type description:
BNS 36 STW-AS-R
Rated impulse withstand voltage:
0.8
Rated insulation voltage:
32 VDC
Reaction time, maximum:
100
Recommendation (actuator):
BPS 36-2
Repeat accuracy R:
≤ 0.1 x S<sub>ao</sub>
Resistance to vibrations to EN 60068-2-6:
10 … 55 Hz, amplitude 1 mm
Restistance to shock:
30 g / 11 ms
Safety Integrity Level (SIL), applicable for:
3
Storage and transport temperature, maximum:
70
Storage and transport temperature, minimum:
-25
Terminal Connector:
Pre-wired cable with M12 connector angled, 4-pole
Traceparts, external ID:
69-05102007-017914
Traceparts, product ID:
33-22052019-081432
Housing
ambient conditions
protection class:
IP 67 to IEC/EN 60529
