office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

BNS40S-12ZG-C

BNS 40S

Producător: Schmersal Cod produs: 101215515 Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Stainless steel enclosure
  • Cable connection suitable for the food industry
  • Concealed mounting possible
  • 88 mm x 27 mm x 14,5 mm
  • Long life
  • no mechanical wear
  • Insensitive to soiling
  • Insensitive to transverse misalignment
  • Suitable for food processing industry
  • LED version
  • especially easy to clean through concealed threaded holes at the rear

Caracteristici

Active area:
lateral

Actuating element:
Magnet

Ambient temperature, maximum:
80

Ambient temperature, minimum:
-25

B10d- Value Normally-closed contact/Normally open contact (NC/NO:
25000000

Basic quantity unit:
Piece

Certificates:
cULus; TÜV; ECOLAB; EAC

Coding:
Yes

Concealed, threaded holes on the back :
Yes

Direction of motion:
Head-on to the active surface

EAN (European Article Number):
4030661419251

eCl@ss number, Version 9.0:
27-27-24-02

Enclosure material:
Stainless steel (V4A)

Ensured switch distance "OFF":
18

Ensured switch distance "ON":
8

Gross weight:
250.000

Height of sensor:
27

Included in delivery:
Actuators must be ordered separately.

Installation conditions (mechanical):
not flush

Integral System Diagnostics, status :
Yes

Length of cable:
1

Length of sensor:
14.5

Material of the Cable mantle:
LiYY

Mission Time:
20

Net weight:
250.000

Note (General):
Contact symbols shown for the closed condition of the guard device.; The contact configuration for versions with or without LED is identical.

Note (Integral System Diagnostics, status ):
The LED is illuminated when the guard is closed.

Note (Wiring diagram):
Contact S21-S22 must be integrated in the safety circuit.

Number of cable wires:
6

Number of openers:
2

Number of shutters:
1

Prerequisite evaluation unit:
Yes

Product group:
Initial

Product name:
BNS 40S

Product type description:
BNS 40S-12ZG-C

Recommendation (actuator):
BPS 40S-2; BPS 40S-1-C; BPS 40S-2-C

Recommended safety switchgear:
SRB-E-301ST; SRB-E-201LC

Resistance to vibrations to EN 60068-2-6:
10 … 55 Hz, amplitude 1 mm

Restistance to shock:
30 g / 11 ms

Standards:
ISO 13849-1

Storage and transport temperature, maximum:
80

Storage and transport temperature, minimum:
-25

Switching capacity, maximum:
0.24

Switching current, maximum:
0.01

Switching frequency, maximum:
5

Switching voltage, maximum:
24

Terminal Connector:
Cable

Traceparts:
Yes

Traceparts, external ID:
69-25102012-123390

Traceparts, product ID:
69-25102012-123390

Versions:
Miscellaneous, Reed contacts

Voltage type:
DC (direct current)

Width of sensor:
88

Wire cross-section:
0.25

ambient conditions

protection class:
IP69K

Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii