office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

CSS14-34-S-D-M-L

CSS 34

Producător: Schmersal Cod produs: 101181059 Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Thermoplastic enclosure
  • Electronic contact-free, coded system
  • Misaligned actuation possible
  • 27 mm x 108.2 mm x 35 mm
  • High repeat accuracy of the switching points
  • Max. length of the sensor chain 200 m
  • 2 short-circuit proof PNP safety outputs
  • Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
  • 1 x Pre-wired cable 8-pole
  • Actuation from side
  • Max. 31 sensors can be wired in series.

Caracteristici

Absicherung des Diagnoseausganges:
short-circuit proof

Absicherung des Sicherheitsausganges:
short-circuit proof

Active area:
Glass-fibre, reinforced thermoplastic

Active principle:
inductive

Actuating panels:
lateral

Actuator switch distance:
Actuator CST 180-1 / CST 180-2: 10 mm; Actuator CST 34-S-1: 14 mm; Actuator CST 34-S-2: 14 mm; Actuator CST 34-S-3: 14 mm; Actuator CST 34-S-1: 12 mm; Actuator CST 34-S-2: 12 mm; Actuator CST 34-S-3: 12 mm; Actuator CST 180-1 / CST 180-2: 8 mm; Actuator CST 34-S-1: 17 mm; Actuator CST 34-S-2: 17 mm; Actuator CST 34-S-3: 17 mm; Actuator CST 180-1 / CST 180-2: 13 mm

Ambient temperature, maximum:
70

Ambient temperature, minimum:
-25

Basic quantity unit:
Piece

Cable section, maximum:
8 x 0.35 mm²

Cascadable:
Yes

Certificates:
cULus; TÜV; EAC

Control category to EN13849:
4

Current derating:
Ambient temperature -25°C … +70°C: ≤ 0.1 A; Ambient temperature -25°C … +65°C: ≤ 0.25 A

Current leakage:
0.5

Current, Utilisation category DC12:
0.05

Current, Utilisation category DC13:
0.05

Degree of pollution to VDE 0100:
3

Diagnostic output:
Yes

Duration of risk, maximum:
60

EAN ( European Article Number):
4030661314822

EAN (European Article Number):
4030661314822

eCl@ss number, Version 9.0:
27-27-24-03

EMC rating:
IEC 61000-6-2

Enclosure material:
Glass-fibre, reinforced thermoplastic

Ensured switch distance "OFF":
13; 17

Ensured switch distance "ON":
12; 8

EPLAN:
Yes

Gross weight:
295.000

Height of sensor:
108.2

Housing construction form:
Block

Hysteresis (Switch distance), maximum:
1.5

Included in delivery:
Actuators must be ordered separately.

Installation conditions (mechanical):
not flush

Integral System Diagnostics, status :
Yes

Interfering radiation:
IEC 61000-6-4

Lead colours:
Black

Length of cable:
2

Length of sensor:
35

Mission Time:
20

Net weight:
295.000

No-load current:
100

Note:
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current

Note (General):
Evaluation requirements: dual-channel safety input, suitable for p-type sensors with NO function. The safety-monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 0.5 ms. Short-circuit recognition by the evaluation is not necessary.

Note (Repeat accuracy R):
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 36 mm (e.g. mounting tolerance or due to guard door sagging). Increased misalignment, max. 53 mm, possible when the CST 34-S-2 actuator is used. The axial misalignment (y) is max. ± 10 mm (see figure: Operating principle)

Number of fail-safe digital outputs:
2

Number of LEDs:
3

Number of semi-conductor outputs with signaling function:
1

Number of Series-wiring of sensors:
31

Operating Current:
600

Output current, (fail-safe output), maximum:
0.25

Overvoltage category:
III

Overvoltage category to VDE 0100:
3

Performance level, up to:
e

PFH-value:
0.0000000036

PIN 1:
A1 Ue Brown

PIN 2:
X1 Safety input 1 White

PIN 3:
A2 GND Blue

PIN 4:
Y1 Safety output 1 Black

PIN 5:
OUT Diagnostic output OUT Grey

PIN 6:
X2 Safety input 2 violet

PIN 7:
Y2 Safety output 2 red

PIN 8:
IN without function Pink

Product group:
Initial

Product name:
CSS 34

Product type description:
CSS 14-34-S-D-M-L

Protection class (Operating resource):
2

Protection rating:
II

Rated impulse withstand voltage:
0.8

Rated insulation voltage:
32 VDC

Rated operating current (safety outputs):
250

Reaction time, maximum:
30

Recommendation (actuator):
CST 34-S-2; CST 34-S-3; CST 180-1; CST 180-2; CST 34-S-1

Recommended safety switchgear:
PROTECT PSC1; SRB-E-301ST; SRB-E-201LC

Repeat accuracy R:
0.5

Required rated short-circuit current to EN 60947-5-1:
100

Resistance to vibrations to EN 60068-2-6:
10 … 55 Hz, amplitude 1 mm

Restistance to shock:
30 g / 11 ms

Safety Integrity Level (SIL), applicable for:
3

Sensor topology:
Sensor for series wiring

Short circuit detection:
Yes

Short-circuit recognition:
Yes

Standards:
IEC 61508; ISO 13849-1; IEC 60947-5-3

Storage and transport temperature, maximum:
85

Storage and transport temperature, minimum:
-25

Switch distance:
10; 14

Switching frequency, approx.:
3

Terminal Connector:
Cable (Y-UL 2517), 8-pole

Traceparts:
Yes

Traceparts, external ID:
69-23102006-028778

Traceparts, product ID:
33-22052019-077912

Versions:
p-type

Voltage drop Ud, maximum:
5

Voltage type:
DC (direct current)

Voltage, Utilisation category DC12:
24

Voltage, Utilisation category DC13:
24

Width of sensor:
27

Wire cross-section:
22

Safety-relevant key characteristics

Safety functions:
Yes

Technical data

Cable type:
LiYY

Housing

Weight:
295

ambient conditions

protection class:
IP 67 to IEC/EN 60529; IP 65 to IEC/EN 60529

Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii