office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

CSS14-34-S-SD-M-ST

CSS 34

Producător: Schmersal Cod produs: 101181066 Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Thermoplastic enclosure
  • Electronic contact-free, coded system
  • Misaligned actuation possible
  • 27 mm x 108.2 mm x 35 mm
  • High repeat accuracy of the switching points
  • Max. length of the sensor chain 200 m
  • 2 short-circuit proof PNP safety outputs
  • Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
  • 1 x connector plug M12, 8-pole
  • Actuation from side
  • serial diagnostic output
  • Max. 31 sensors can be wired in series.

Caracteristici

Absicherung des Diagnoseausganges:
short-circuit proof

Absicherung des Sicherheitsausganges:
short-circuit proof

Active area:
Glass-fibre, reinforced thermoplastic

Active principle:
inductive

Actuating panels:
lateral

Actuator switch distance:
Actuator CST 180-1 / CST 180-2: 10 mm; Actuator CST 34-S-1: 14 mm; Actuator CST 34-S-2: 14 mm; Actuator CST 34-S-3: 14 mm; Actuator CST 34-S-1: 12 mm; Actuator CST 34-S-2: 12 mm; Actuator CST 34-S-3: 12 mm; Actuator CST 180-1 / CST 180-2: 8 mm; Actuator CST 34-S-1: 17 mm; Actuator CST 34-S-2: 17 mm; Actuator CST 34-S-3: 17 mm; Actuator CST 180-1 / CST 180-2: 13 mm

Ambient temperature, maximum:
70

Ambient temperature, minimum:
-25

Basic quantity unit:
Piece

Cascadable:
Yes

Certificates:
cULus; TÜV; EAC

Control category to EN13849:
4

Current derating:
Ambient temperature -25°C … +70°C: ≤ 0.1 A; Ambient temperature -25°C … +65°C: ≤ 0.25 A

Current leakage:
0.5

Current, Utilisation category DC12:
0.25

Current, Utilisation category DC13:
0.25

Degree of pollution to VDE 0100:
3

Diagnostic output:
Yes

Duration of risk, maximum:
60

EAN ( European Article Number):
4030661314891

EAN (European Article Number):
4030661314891

eCl@ss number, Version 9.0:
27-27-24-03

EMC rating:
IEC 61000-6-2

Enclosure material:
Glass-fibre, reinforced thermoplastic

Ensured switch distance "OFF":
13; 17

Ensured switch distance "ON":
12; 8

EPLAN:
Yes

Gross weight:
140.000

Height of sensor:
108.2

Housing construction form:
Block

Hysteresis (Switch distance), maximum:
1.5

Included in delivery:
Actuators must be ordered separately.

Installation conditions (mechanical):
not flush

Integral System Diagnostics, status :
Yes

Interfering radiation:
IEC 61000-6-4

Length of sensor:
35

Mission Time:
20

Net weight:
140.000

No-load current:
100

Note:
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current

Note (Electrical data, Fuse rating):
(Circuit breaker)

Note (General):
Evaluation requirements: dual-channel safety input, suitable for p-type sensors with NO function. The safety-monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 0.5 ms. Short-circuit recognition by the evaluation is not necessary.

Note (Repeat accuracy R):
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 36 mm (e.g. mounting tolerance or due to guard door sagging). Increased misalignment, max. 53 mm, possible when the CST 34-S-2 actuator is used. The axial misalignment (y) is max. ± 10 mm (see figure: Operating principle)

Number of fail-safe digital outputs:
2

Number of LEDs:
3

Number of semi-conductor outputs with signaling function:
1

Number of Series-wiring of sensors:
31

Operating Current:
600

Operating current (diagnostic output):
150

Output current, (fail-safe output), maximum:
0.25

Overvoltage category:
III

Overvoltage category to VDE 0100:
3

Performance level, up to:
e

PFH-value:
0.0000000036

PIN 1:
1A1 Ue: (1)

PIN 2:
X1 Safety input 1

PIN 3:
A2 GND

PIN 4:
Y1 Safety output 1

PIN 5:
SD serial diagnostic output

PIN 6:
X2 Safety input 2

PIN 7:
Y2 Safety output 2

PIN 8:
IN serial diagnostic input

Product group:
Initial

Product name:
CSS 34

Product type description:
CSS 14-34-S-SD-M-ST

Protection class (Operating resource):
2

Protection rating:
II

Rated impulse withstand voltage:
0.8

Rated insulation voltage:
32 VDC

Rated operating current (safety outputs):
250

Reaction time, maximum:
30

Recommendation (actuator):
CST 34-S-2; CST 34-S-3; CST 180-1; CST 180-2; CST 34-S-1

Recommended safety switchgear:
PROTECT PSC1; SRB-E-301ST; SRB-E-201LC

Repeat accuracy R:
0.5

Required rated short-circuit current to EN 60947-5-1:
100

Resistance to vibrations to EN 60068-2-6:
10 … 55 Hz, amplitude 1 mm

Restistance to shock:
30 g / 11 ms

Safety Integrity Level (SIL), applicable for:
3

Sensor topology:
Sensor for series wiring

Serial diagnostics:
Yes

Short circuit detection:
Yes

Short-circuit recognition:
Yes

Standards:
IEC 61508; ISO 13849-1; IEC 60947-5-3

Storage and transport temperature, maximum:
85

Storage and transport temperature, minimum:
-25

Switch distance:
10; 14

Switching frequency, approx.:
3

Terminal Connector:
Connector plug M12, 8-pole

Traceparts:
Yes

Traceparts, external ID:
69-23102006-028778

Traceparts, product ID:
33-22052019-077912

Versions:
p-type

Voltage drop Ud, maximum:
5

Voltage type:
DC (direct current)

Voltage, Utilisation category DC12:
24

Voltage, Utilisation category DC13:
24

Width of sensor:
27

Safety-relevant key characteristics

Safety functions:
Yes

Housing

Weight:
140

ambient conditions

protection class:
IP 67 to IEC/EN 60529; IP 65 to IEC/EN 60529

Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii