Caracteristici
Absicherung des Diagnoseausganges:
short-circuit proof
Absicherung des Sicherheitsausganges:
short-circuit proof
Active area:
Glass-fibre, reinforced thermoplastic
Active principle:
inductive
Ambient temperature, maximum:
60
Ambient temperature, minimum:
-25
Basic quantity unit:
Piece
Certificates:
cULus; EAC; IFA
Control category to EN13849:
4
Current, Utilisation category DC12:
0.5
Current, Utilisation category DC13:
0.5
Degree of pollution to VDE 0100:
3
Delivery scope of Mounting material:
2x nuts M18 x 1
Duration of risk, maximum:
30
EAN ( European Article Number):
4030661208787
EAN (European Article Number):
4030661208787
eCl@ss number, Version 9.0:
27-27-24-03
Enclosure material:
Glass-fibre, reinforced thermoplastic
Ensured switch distance "OFF":
10
Ensured switch distance "ON":
7
Housing construction form:
Cylinder, thread
Hysteresis (Switch distance), maximum:
0.7
Included in delivery:
Actuators must be ordered separately.
Installation conditions (mechanical):
not flush
Integral System Diagnostics, status :
Yes
ISO thread of the sensor:
M18
Material of the nuts:
Glass-fibre, reinforced thermoplastic
Note (Characteristic curve):
S: switching distance; V: Axial misalignment; Son: Switch-on distance; Soff: Switch-off distance; Sh: Hysteresis area; Sao: Assured switching distance ON; Sar: Ensured switch distance "OFF"
Note (General):
Evaluation requirements: dual-channel safety input, suitable for p-type sensors with NO function. The safety-monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 0.25 ms. Short-circuit recognition by the evaluation is not necessary.
Note (LED switching conditions display):
Multi-coloured LED: Green, Red, Yellow
Number of fail-safe digital outputs:
2
Number of Series-wiring of sensors:
16
Operating voltage, maximum:
26.4
Operating voltage, minimum:
20.4
Output current, (fail-safe output), maximum:
0.5
Overvoltage category:
III
Overvoltage category to VDE 0100:
3
Performance level, up to:
e
PIN 2:
Y2 safety output 2, X2 safety input 2: White
PIN 4:
Y1 safety output 1, X1 safety input 1: Black
Product type description:
CSS 8-180-2P-Y-L
Protection class (Operating resource):
2
Rated impulse withstand voltage:
0.8
Rated insulation voltage:
32 VDC
Rated operating current (safety outputs):
500
Rated operating voltage:
24 VDC
Reaction time, maximum:
30
Recommendation (actuator):
CST 180-1; CST 180-2
Recommended safety switchgear:
PROTECT PSC1; SRB-E-301ST; SRB-E-201LC
Resistance to vibrations to EN 60068-2-6:
10 … 55 Hz, amplitude 1 mm
Restistance to shock:
30 g / 11 ms
Safety Integrity Level (SIL), applicable for:
3
Sensor topology:
Sensor for series wiring
Short circuit detection:
Yes
Short-circuit recognition:
Yes
Standards:
IEC 61508; ISO 13849-1; IEC 60947-5-3
Storage and transport temperature, maximum:
85
Storage and transport temperature, minimum:
-25
Switching frequency, approx.:
3
Terminal Connector:
Cable
Terminal connector, Input:
4-pole
Terminal connector, Output:
4-pole
Tightening torque of nuts, maximum:
3
Traceparts, external ID:
69-23102006-028473
Traceparts, product ID:
33-22052019-077908
Voltage drop Ud, maximum:
0.5
Voltage type:
DC (direct current)
Voltage, Utilisation category DC12:
24
Voltage, Utilisation category DC13:
24
Safety-relevant key characteristics
Housing
ambient conditions
protection class:
IP 67 to IEC/EN 60529; IP 65 to IEC/EN 60529
