office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

EX-BNS40S-12ZG-C

EX-BNS40S

Producător: Schmersal Cod produs: 103002177 Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Ex-Zone 2 and 22
  • Stainless steel enclosure
  • 88 mm x 27 mm x 14,5 mm
  • Concealed mounting possible
  • Insensitive to transverse misalignment
  • no mechanical wear
  • Suitable for food processing industry
  • Cable connection suitable for the food industry
  • LED version
  • especially easy to clean through concealed threaded holes at the rear

Caracteristici

Manufacturer declaration

:
ATEX Zone 2 and 22

Active area:
lateral

Actuating element:
Magnet

Ambient temperature, maximum:
60

Ambient temperature, minimum:
-20

B10d- Value Normally-closed contact/Normally open contact (NC/NO:
25000000

Basic quantity unit:
Piece

Coding:
Yes

Concealed, threaded holes on the back :
Yes

Direction of motion:
Head-on to the active surface

EAN (European Article Number):
4030661428512

eCl@ss number, Version 9.0:
27-27-24-02

Enclosure material:
Stainless steel (V4A)

Ensured switch distance "OFF":
18

Ensured switch distance "ON":
8

Explosion protection category:
3D; 3G

Explosion protection designation:
D II 3D Ex tc IIIC T80°C Dc X; D II 3G Ex nA nC IIC T6 Gc

Explosion protection zones:
22; 2

Explosion protection: regulations:
EN 60079-31; EN 60079-15; IEC 60079-0

Gross weight:
200.000

Height of sensor:
27

Housing construction form:
Block

Impact energy, maximum:
7

Included in delivery:
Actuators must be ordered separately.

Installation conditions (mechanical):
not flush

Integral System Diagnostics, status :
Yes

Length of cable:
1

Length of sensor:
14.5

Material of the Cable mantle:
LiYY

Mission Time:
20

Net weight:
200.000

Note (General):
Contact symbols shown for the closed condition of the guard device.; The contact configuration for versions with or without LED is identical.

Note (Integral System Diagnostics, status ):
The LED is illuminated when the guard is closed.

Note (Wiring diagram):
Contact S21-S22 must be integrated in the safety circuit.

Number of cable wires with indication of cable cross-section:
6

Number of openers:
2

Number of shutters:
1

Prerequisite evaluation unit:
Yes

Product group:
Initial

Product name:
EX-BNS40S

Product type description:
EX-BNS40S-12ZG-C

Recommendation (actuator):
BPS 40S-2; BPS 40S-1-C; BPS 40S-2-C

Recommended safety switchgear:
SRB-E-301ST; SRB-E-201LC

Required rated short-circuit current to EN 60947-5-1:
100

Resistance to vibrations to EN 60068-2-6:
10 … 55 Hz, amplitude 1 mm

Restistance to shock:
30 g / 11 ms

Short circuit detection:
Yes

Short-circuit recognition:
Yes

Standards:
ISO 13849-1

Storage and transport temperature, maximum:
80

Storage and transport temperature, minimum:
-25

Switching capacity, maximum:
0.24

Switching current, maximum:
0.01

Switching frequency, maximum:
5

Switching voltage, maximum:
24

Terminal Connector:
Cable

Versions:
Miscellaneous, Reed contacts

Voltage type:
DC (direct current)

Width of sensor:
88

Wire cross-section:
0.25

ambient conditions

protection class:
IP 67 to IEC/EN 60529; IP 65 to IEC/EN 60529

Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii