office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

ExEIL580-T

Encoder incremental

Producător: Baumer Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Size ø58 mm
  • Precise optical sensing
  • Output signal level TTL or HTL
  • Through hollow shaft, ø8…15 mm
  • Connection radial or tangential
  • Pulses per revolution up to 5000
  • High resistance to shock and vibrations
  • Option 0122, Explosion protection zone 22

Technical data - electrical ratings

Voltage supply:
5 VDC ±5 %
8...30 VDC
4.75...30 VDC

Consumption w/o load:
≤70 mA

Reverse polarity protection:
Yes

Pulses per revolution:
100 … 5000

Short-circuit proof:
Yes (HTL)
Yes (TTL, max. 1 s and 1 signal)

Phase shift:
90 ° ±10°

Reference signal:
Zero pulse, width 90° ±10 %

Duty cycle:
40…60 %

Sensing method:
Optical

Interference immunity:
DIN EN 61000-6-2

Emitted interference:
DIN EN 61000-6-3

Output signals:
A+, B+, R+, A-, B-, R-

Output frequency:
≤300 kHz (TTL)
≤160 kHz (HTL)

Output stages:
TTL/RS422
HTL/push-pull

Approval:
UL 508 / CSA 22.2

Technical data - mechanical design

Size (flange):
ø58 mm

Shaft type:
ø8...15 mm (through hollow shaft)
ø9.52 mm (through hollow shaft)
ø12.7 mm (through hollow shaft)

Protection DIN EN 60529:
IP 65

Operating speed:
≤6000 rpm (+20 °C)
≤4500 rpm (+40 °C)
≤2500 rpm (+60 °C)

Starting torque:
≤0,025 Nm (+20 °C)

Ambient temperature:
-20...+60 °C

Material:
Housing: aluminium die-cast
Flange: aluminium

Relative humidity:
90 % non-condensing

Resistance:
DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz
DIN EN 60068-2-27 Shock 250 g, 6 ms

Weight approx.:
300 g

Connection:
Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cable

Explosion protection:
II 3 D Ex tc IIIC T135°C Dc X (dust): see special conditions “X”

Data sheet

Data sheet – ExEIL580-T - FR Descarca
Data sheet – ExEIL580-T - EN Descarca
Data sheet – ExEIL580-T - DE Descarca

Installation and operating instructions

ExEIL580 - DE/EN Descarca

Certificates / approvals

UL certificate E240061 - EN Descarca

Brochures / Catalogs

EIL580 - EN Descarca
EIL580 - FR Descarca
EIL580 - DE Descarca

3D CAD

EIL580: Through hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, without stator coupling, IP65 / STEP (EIL580-TN14.5Fx.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, pin torque support 3 mm, IP65 / STEP (EIL580-TP14.5Bx.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, stator coupling, IP65 / STEP (EIL580-TT14.5Bx.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, without stator coupling, IP65 / STEP (EIL580-TN14.5Bx.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø14 mm, clamping ring at A side, cable tangential, pin torque support 3 mm, IP65 / STEP (EIL580-TP14.5Px.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø14 mm, clamping ring at A side, cable tangential, stator coupling, IP65 / STEP (EIL580-TT14.5Px.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø14 mm, clamping ring at A side, cable tangential, without stator coupling, IP65 / STEP (EIL580-TN14.5Px.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø14 mm, clamping ring at A side, cable radial, stator coupling, IP65 / STEP (EIL580-TT14.5Rx.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø14 mm, clamping ring at A side, cable radial, without stator coupling, IP65 / STEP (EIL580-TN14.5Rx.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø12 mm, clamping ring at A side, connector M23 radial, stator coupling, IP65 / STEP (EIL580-TT12.5Fx.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø12 mm, clamping ring at A side, connector M12 radial, stator coupling, IP65 / STEP (EIL580-TT12.5Bx.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø12 mm, clamping ring at A side, cable radial, without stator coupling, IP65 / STEP (EIL580-TN12.5Rx.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø10 mm, clamping ring at A side, cable radial, stator coupling, IP65 / STEP (EIL580-TT10.5Lx.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, stator coupling, IP65 / STEP (EIL580-TT14.5Fx.xxxxx.A) - STEP Descarca
EIL580: Through hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, pin torque support 3 mm, IP65 / STEP (EIL580-TP14.5Fx.xxxxx.A) - STEP Descarca

Declaration of conformity

ExEIL580 - DE/EN/FR Descarca
Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii