office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

ExEIL580P-SC

Encoder incremental

Producător: Baumer Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Size ø58 mm
  • Precise optical sensing (interpolated)
  • Output signal level programmable (TTL or HTL)
  • Clamping flange
  • Connection axial, radial or tangential
  • Pulses per revolution 1...65536, programmable
  • High resistance to shock and vibrations
  • Option 0122, Explosion protection zone 22

Technical data - electrical ratings

Voltage supply:
4.75...30 VDC

Consumption w/o load:
≤70 mA

Reverse polarity protection:
Yes

Pulses per revolution:
1 … 65536

Short-circuit proof:
Yes

Reference signal:
Zero pulse 90° or 180°

Initializing time:
≤30 ms after power on

Duty cycle:
45…55 % typical at 1024, 2048 ppr (further see table Duty cycle)

Sensing method:
Optical

Interference immunity:
DIN EN 61000-6-2

Emitted interference:
DIN EN 61000-6-3

Output signals:
A+, B+, R+, A-, B-, R-

Programmable parameters:
Output level TTL/HTL
Pulse number 1...65536
Zero pulse width 90°/180°
Zero pulse position
Signal sequence

Output frequency:
≤300 kHz (TTL)
≤160 kHz (HTL)

Output stages:
TTL/RS422
HTL/push-pull

Approval:
UL 508 / CSA 22.2

Technical data - mechanical design

Size (flange):
ø58 mm

Shaft type:
ø10 x 20 mm, solid shaft with flat

Flange:
Clamping flange

Protection DIN EN 60529:
IP 65

Operating speed:
≤12000 rpm (+20 °C)
≤11000 rpm (+40 °C)
≤8000 rpm (+60 °C)

Starting torque:
≤0,015 Nm (+20 °C)

Admitted shaft load:
≤40 N axial
≤80 N radial

Ambient temperature:
-20...+60 °C

Material:
Housing: aluminium die-cast
Flange: aluminium
Solid shaft: stainless steel

Relative humidity:
90 % non-condensing

Resistance:
DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz
DIN EN 60068-2-27 Shock 300 g, 6 ms

Weight approx.:
300 g

Connection:
Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cable

Explosion protection:
II 3 D Ex tc IIIC T135°C Dc X (dust): see special conditions “X”

Data sheet

Data sheet – ExEIL580P-SC - DE Descarca
Data sheet – ExEIL580P-SC - EN Descarca
Data sheet – ExEIL580P-SC - FR Descarca

Installation and operating instructions

ExEIL580 - DE/EN Descarca

Certificates / approvals

UL certificate E240061 - EN Descarca

Brochures / Catalogs

EIL580P Programmable - DE Descarca
EIL580P Programmable - EN Descarca
EIL580P Programmable - FR Descarca

Software

Encoder Software v3.3 05.07.16 - Download Descarca

3D CAD

EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable axial, IP65 / STEP (EIL580-SC10.5Tx.xxxxx.A) - STEP Descarca
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable radial, IP65 / STEP (EIL580-SC10.5Rx.xxxxx.A) - STEP Descarca
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, cable tangential, IP65 / STEP (EIL580-SC10.5Px.xxxxx.A) - STEP Descarca
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M12 axial, IP65 / STEP (EIL580-SC10.5Ax.xxxxx.A) - STEP Descarca
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M12 radial, IP65 / STEP (EIL580-SC10.5Bx.xxxxx.A) - STEP Descarca
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M23 axial, IP65 / STEP (EIL580-SC10.5Dx.xxxxx.A) - STEP Descarca
EIL580: Clamping flange (centering collar ø36 mm), solid shaft ø10 mm, connector M23 radial, IP65 / STEP (EIL580-SC10.5Fx.xxxxx.A) - STEP Descarca

Declaration of conformity

ExEIL580 - DE/EN/FR Descarca
Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii