office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

Fiber-optic receiver: LWL-EHR

Accesorii

Producător: Baumer Cod produs: 29235 Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Transmission length up to 1500 m
  • Reconversion of optical signals into electrical signals and generation of status signals
  • Transmission error detection via checksum (CRC)
  • High-precision transmission of signals (Jitter <100 ns)
  • Constant delay time <20 μs
  • Automatic channel switchover in realtime upon failure of one fiber-optic channel

Technical data - electrical ratings

Voltage supply:
9...30 VDC

Consumption:
≤300 mA

Input level:
Ack >2.5 V

Outputs:
HTL (power linedriver)
TTL (RS422)

Start time:
<500 ms

Wave length:
~820 nm

Input signals:
Fiber1, Fiber2, Ack1, Ack2

Output level:
HTL: LOW: ≤0.2 UB; HIGH: ≥0.8 UB TTL: LOW: ≤0.7 V; HIGH: ≥3 V

Transmission length:
≤1500 m

LED operating status:
1x power LED (green) 1x overload LED (red) 1x status LED (green) each channel 1x error LED (red) each channel 1x link LED (green) each channel

Status output:
S1, S2 (configurable)

Inputs:
2x fiber-optic, 2x error acknowledgement (Ack)

Output signals:
K1, K2, K0 + inverted
Err + inverted
Status S1, status S2, sum status (SSum)

Output frequency:
≤300 kHz (HTL)
≤1 MHz (TTL)

Technical data - mechanical design

Dimensions W x H x L:
100 x 75 x 53 mm

Protection DIN EN 60529:
IP 20

Housing type:
Mounting on standard rails according to EN 50022

Operating temperature:
-20...+70 °C (without dew)

Connection:
Screw terminal connector
2x ST connector

Data sheet

Fiber-optic receiver: LWL-EHR - FR Descarca
Fiber-optic receiver: LWL-EHR - EN Descarca
Fiber-optic receiver: LWL-EHR - DE Descarca

Installation and operating instructions

LWL-SBR, LWL-SHR, LWL-EHR - DE/EN Descarca

Declaration of conformity

HEAGxxx - DE/EN/FR Descarca
Acorda o nota:

Produse asemanatoate

Mounting adaptor for encoders with clamping flange

Mounting angle inclusive fixing screws for encoder with clamping flange and mounting bore M3..

0,00 Lei

Vezi toate detalii

Mounting adaptor for encoders with clamping flange (M3) (Z 119.017)

Mounting angle inclusive fixing screws for encoder with clamping flange and mounting bore M3..

0,00 Lei

Vezi toate detalii

Coupling CPS25 L=19 d1=06/d2=06

Separable, torsion proof coupling with small profile depth..

0,00 Lei

Vezi toate detalii

Coupling CPS25 L=19 d1=06/d2=08

Separable, torsion proof coupling with small profile depth..

0,00 Lei

Vezi toate detalii

Coupling CPS25 L=19 d1=08/d2=10

Separable, torsion proof coupling with small profile depth..

0,00 Lei

Vezi toate detalii

Coupling CPS25 L=19 d1=10/d2=06

Separable, torsion proof coupling with small profile depth..

0,00 Lei

Vezi toate detalii

Coupling CPS25 L=19 d1=10/d2=12

Separable, torsion proof coupling with small profile depth..

0,00 Lei

Vezi toate detalii

Coupling CPS25 L=19 d1=12/d2=06

Separable, torsion proof coupling with small profile depth..

0,00 Lei

Vezi toate detalii

Torque arm M6, length 67...70 mm

Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size seri..

0,00 Lei

Vezi toate detalii

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii