office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

HEAG 160

Accesorii

Producător: Baumer Cod produs: 29223 Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Converting of SinCos signals into multiplied SinCos signals
  • Additional interpolation of HTL or TTL signals (multiplying or dividing)
  • Oversampling with 24 MHz
  • Digitally pre-filter
  • Very high output frequency possible

Technical data - electrical ratings

Voltage supply:
5 VDC ±5 %
10...30 VDC

Consumption:
≤500 mA (5 VDC)
≤300 mA (10...30 VDC)

Outputs:
SinCos + TTL
SinCos + HTL
Error output

Amplitude resolution:
12 bit

Input signals:
A+, A-, B+, B-, R+, R-

Interpolation factor for HTL output (multiplying):
1…2048

Interpolation factor for HTL output (dividing):
1/2...1/2048

Interpolation factor for SinCos output (multiplying):
1…128

Interpolation factor for TTL output (multiplying):
1…2048

Interpolation factor for TTL output (dividing):
1/2...1/2048

Inputs:
SinCos
2x SinCos

Output signals:
A+, B+, R+, A-, B-, R-
Option: A+, B+, R+, A-, B-, R-, Error-

Output frequency:
≤2 MHz (HTL)
≤5 MHz (TTL)
≤600 kHz (SinCos)

Technical data - mechanical design

Dimensions W x H x L:
122 x 122 x 80 mm

Protection DIN EN 60529:
IP 65

Operating temperature:
0...+50 °C

Resistance:
IEC 60068-2-6
Vibration 1 g, 50...2000 Hz
IEC 60068-2-27
Shock 30 g, 11 ms

Weight approx.:
1 kg

Connection:
Connector M23, 12-pin
Connector, 3-pin, external voltage supply

Data sheet

HEAG 160 - FR Descarca
HEAG 160 - EN Descarca
HEAG 160 - DE Descarca

Declaration of conformity

HEAGxxx - DE/EN/FR Descarca
Acorda o nota:

Produse asemanatoate

Mounting adaptor for encoders with clamping flange

Mounting angle inclusive fixing screws for encoder with clamping flange and mounting bore M3..

0,00 Lei

Vezi toate detalii

Mounting adaptor for encoders with clamping flange (M3) (Z 119.017)

Mounting angle inclusive fixing screws for encoder with clamping flange and mounting bore M3..

0,00 Lei

Vezi toate detalii

Coupling CPS25 L=19 d1=06/d2=06

Separable, torsion proof coupling with small profile depth..

0,00 Lei

Vezi toate detalii

Coupling CPS25 L=19 d1=06/d2=08

Separable, torsion proof coupling with small profile depth..

0,00 Lei

Vezi toate detalii

Coupling CPS25 L=19 d1=08/d2=10

Separable, torsion proof coupling with small profile depth..

0,00 Lei

Vezi toate detalii

Coupling CPS25 L=19 d1=10/d2=06

Separable, torsion proof coupling with small profile depth..

0,00 Lei

Vezi toate detalii

Coupling CPS25 L=19 d1=10/d2=12

Separable, torsion proof coupling with small profile depth..

0,00 Lei

Vezi toate detalii

Coupling CPS25 L=19 d1=12/d2=06

Separable, torsion proof coupling with small profile depth..

0,00 Lei

Vezi toate detalii

Torque arm M6, length 67...70 mm

Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size seri..

0,00 Lei

Vezi toate detalii

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii