office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

MAGRES - EAM360R-S - Analog

Encoder absolut

Producător: Baumer Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Encoder single- or multiturn / Analog
  • E1 compliant design
  • High protection up to IP 67
  • High resistance to shock and vibrations
  • Protection against corrosion CX (C5-M)
  • Wire cross section 0.5 mm²
  • Teach input for adjustment of measuring range
  • Applicable up to PLd (ISO 13849)

Technical data - electrical ratings

Voltage supply:
8...30 VDC
14...30 VDC

Reverse polarity protection:
Yes

Consumption typ.:
20 mA (24 VDC, w/o load)

Initializing time:
≤170 ms after power on

Response time:
< 1 ms

Interface:
Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit

Function:
Multiturn
Singleturn

Teach range:
5°...359.9° (singleturn)
5°...32767 turns (multiturn)

Absolute accuracy:
±0,15 ° (+20 ±15 °C)
±0,25 ° (-40...+85 °C) sensor

Accuracy analog output:
±0.5 % of whole measuring range (-40...+85 °C)

Sensing method:
Magnetic

Interference immunity:
DIN EN 61000-6-2
ISO 11452-2:2004* / -5:2002*
ISO 7637-2:2004*
ISO 10605:2008 + Amd 1:2014 (CD ±8 kV / AD ±15 kV)
* Severity level according to ECE R10 (Rev. 4)

Emitted interference:
DIN EN 61000-6-4 CISPR 25:2008 (30...1000 MHz)
ISO 7637-2:2004*
* Severity level according to ECE R10 (Rev. 4)

MTTFd (ISO 13849):
High (>100 years)
Use in safety functions exclusively based on Application Note and MTTFd reliability prediction (request separately).

Programmable parameters:
Measuring range teachable

Diagnostic function:
DATAVALID

Factory setting:
360° and 10 revolutions (other on request)

Technical data - mechanical design

Size (flange):
ø36 mm

Shaft type:
ø10 x 16 mm, solid shaft with flat

Flange:
Synchro flange

Protection DIN EN 60529:
IP 67 (with shaft seal)

Operating speed:
≤6000 rpm

Starting torque:
≤2,5 Ncm (+20 °C, IP 67)

Admitted shaft load:
≤40 N axial
≤80 N radial

Moment of inertia:
15,38 gcm²

Material:
Housing: steel, powder-coated
Flange: aluminium
Shaft: stainless steel

Corrosion protection:
IEC 60068-2-52 Salt mist
for ambient conditions CX (C5-M) according to ISO 12944-2

Operating temperature:
-40...+85 °C (see general information)

Relative humidity:
95 %

Resistance:
DIN EN 60068-2-6
Vibration 30 g, 10...2000 Hz
DIN EN 60068-2-27
Shock 500 g, 1 ms

Weight approx.:
170 g

Connection:
Flange connector M12, 5-pin
Cable 2 m

Data sheet

Data sheet – EAM360R-S - Analog - FR Descarca
Data sheet – EAM360R-S - Analog - EN Descarca
Data sheet – EAM360R-S - Analog - DE Descarca

Installation and operating instructions

EAM360R - analog - DE/EN/FR/IT/ES Descarca

Brochures / Catalogs

EAM580, EAM360 - EN Descarca
EAM580, EAM360 - FR Descarca
EAM580, EAM360 - DE Descarca

3D CAD

EAM360 / EAM360R: Solid shaft ø10 mm, M12 radial, synchro flange, IP67 - STEP Descarca
EAM360 / EAM360R: Solid shaft ø10 mm, cable radial, synchro flange, IP67 - STEP Descarca

Declaration of conformity

EAM360 - DE/EN/FR Descarca
Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii