office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

MZM 100 B ST2-1P2PW2RE-A

MZM 100

Producător: Schmersal Cod produs: 101211070 Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Automatic latching
  • Solenoid interlocks (for the protection of man) with innovating and unique operating principle
  • 40 mm x 179 mm x 40 mm
  • Electronic contact-free, coded system
  • Thermoplastic enclosure
  • Max. length of the sensor chain 200 m
  • 3 LEDs to show operating conditions
  • Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
  • Intelligent diagnosis
  • Self-monitoring series-wiring
  • Patented
  • Actuator monitored
  • Connector M12, 8-pole
  • Power to lock

Caracteristici

Absicherung des Diagnoseausganges:
short-circuit proof, p-type

Active principle:
inductive

Actuator monitored:
Yes

Ambient temperature, maximum:
55

Ambient temperature, minimum:
-25

Basic quantity unit:
Piece

CADENAS:
Yes

Certificates:
cULus; EAC; Appendix X / MRL

Clamping force, guaranteed:
500

Clamping force, typically:
750

Classification ZVEI CB24I, Sink:
C1

Classification ZVEI CB24I, Source:
C1

Coding level according to ISO 14119:
Low

Control category:
4

Current leakage:
0.5

Current, Utilisation category DC13:
0.05

Degree of pollution to VDE 0100:
3

Duration of risk, maximum:
150

EAN ( European Article Number):
4030661389080

EAN (European Article Number):
4030661389080

eCl@ss number, Version 9.0:
27-27-26-03

Electrical fuse rating:
short-circuit proof, p-type

Enclosure material:
Glass-fibre, reinforced thermoplastic

EPLAN:
Yes

Fuse rating to UL 508, maximum:
2

general information:
Universal coding

Gross weight:
700.000

Height of sensor:
179

Included in delivery:
Actuators must be ordered separately.

Integral System Diagnostics, status :
Yes

Latching:
Yes

Latching force, maximum:
100

Latching force, minimum:
30

Length of sensor:
40

Mechanical life, minimum:
1000000

Mission Time:
20

Net weight:
700.000

No-load current:
500

Note:
Cable length and cable section alter the voltage drop depending on the output current

Note (General):
As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened.

Note (LED switching conditions display):
Supply voltage UB: LED green; Operating condition: LED green; Error / functional defect: LED red

Note (Mechanical lifetime):
Operations for door weights ≤ 5 kg; Actuating speed < 0.5 m/s

Note (Relative humidity):
non-condensing; non-icing

Number of safety contacts:
2

Number of Series-wiring of sensors:
31

Operating Current:
50

Operating voltage, maximum:
26.4

Operating voltage, minimum:
20.4

Overvoltage category:
III

Overvoltage category to VDE 0100:
3

Performance level, up to:
e

PFH-value:
0.00000000354

PIN 1:
A1 Supply voltage UB

PIN 2:
X1 Safety input 1

PIN 3:
A2 GND

PIN 4:
Y1 Safety output 1

PIN 5:
OUT Diagnostic output

PIN 6:
X2 Safety input 2

PIN 7:
Y2 Safety output 2

PIN 8:
IN Solenoid control

Power to lock:
Yes

Product group:
Initial

Product name:
MZM 100

Product type description:
MZM 100 B ST2-1P2PW2RE-A

Protection class (Operating resource):
3

Protection rating:
III

Rated impulse withstand voltage:
0.8

Rated insulation voltage:
32 VDC

Rated operating current (safety outputs):
250

Reaction time, maximum:
150

Recommendation (actuator):
MZM 100-B1.1

Relative humidity, maximum:
95

Relative humidity, minimum:
30

Required rated short-circuit current to EN 60947-5-1:
100

Resistance to vibrations to EN 60068-2-6:
10 … 150 Hz, amplitude 0.35 mm

Restistance to shock:
30 g / 11 ms

Safety Integrity Level (SIL), applicable for:
3

Series-wiring:
Yes

Short circuit detection:
Yes

Short-circuit recognition:
Yes

Standards:
IEC 61508; EN 60947-5-1; IEC 60947-5-3

Storage and transport temperature, maximum:
85

Storage and transport temperature, minimum:
-25

Switching frequency, maximum:
1

Switching thresholds of fail-safe inputs:
−3 V … 5 V (Low); 15 V … 30 V (High)

Switching thresholds of magnet inputs:
-3 V … 5 V (Low); 15 V … 30 V (High)

Terminal Connector:
Connector M12, 8-pole

Time to readiness, maximum:
4000

Traceparts:
Yes

Traceparts, external ID:
69-05102007-016632

Traceparts, product ID:
69-05102007-016632

Voltage drop Ud, maximum:
4

Voltage, Utilisation category DC13:
24

Width of sensor:
40

Safety-relevant key characteristics

Safety functions:
Yes

Housing

Weight:
500

ambient conditions

protection class:
IP 67 to IEC/EN 60529

Acorda o nota:

Produse asemanatoate

MZM 100 B ST-1P2PW2RE-A

Automatic latchingSolenoid interlocks (for the protection of man) with innovating and unique operati..

0,00 Lei

Vezi toate detalii

MZM 100 ST-1P2PR-A

Automatic latchingSolenoid interlocks (for the protection of man) with innovating and unique operati..

0,00 Lei

Vezi toate detalii

MZM100BST2-1P2PW2REM-A

Automatic latchingSolenoid interlocks (for the protection of man) with innovating and unique operati..

0,00 Lei

Vezi toate detalii

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii