Caracteristici
Absicherung des Diagnoseausganges:
short-circuit proof, p-type
Active principle:
inductive
Ambient temperature, maximum:
55
Ambient temperature, minimum:
-25
Basic quantity unit:
Piece
Certificates:
cULus; EAC; Appendix X / MRL
Clamping force, guaranteed:
500
Clamping force, typically:
750
Classification ZVEI CB24I, Sink:
C1
Classification ZVEI CB24I, Source:
C1
Coding level according to ISO 14119:
Low
Current, Utilisation category DC13:
0.05
Degree of pollution to VDE 0100:
3
Duration of risk, maximum:
150
EAN ( European Article Number):
4030661358864
EAN (European Article Number):
4030661358864
eCl@ss number, Version 9.0:
27-27-26-03
Electrical fuse rating:
short-circuit proof, p-type
Enclosure material:
Glass-fibre, reinforced thermoplastic
Fuse rating to UL 508, maximum:
2
general information:
Universal coding
Guard locking monitored:
Yes
Included in delivery:
Actuators must be ordered separately.
Integral System Diagnostics, status :
Yes
Mechanical life, minimum:
1000000
Note:
Cable length and cable section alter the voltage drop depending on the output current
Note (General):
As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened.
Note (LED switching conditions display):
Supply voltage UB: LED green; Operating condition: LED green; Error / functional defect: LED red
Note (Mechanical lifetime):
Operations for door weights ≤ 5 kg; Actuating speed < 0.5 m/s
Note (Relative humidity):
non-condensing; non-icing
Number of safety contacts:
2
Number of Series-wiring of sensors:
31
Operating voltage, maximum:
26.4
Operating voltage, minimum:
20.4
Overvoltage category:
III
Overvoltage category to VDE 0100:
3
Performance level, up to:
e
PIN 1:
A1 Supply voltage UB
PIN 4:
Y1 Safety output 1
PIN 5:
OUT Diagnostic output
PIN 7:
Y2 Safety output 2
PIN 8:
IN Solenoid control
Product type description:
MZM 100 ST-1P2PWR-A
Protection class (Operating resource):
3
Rated impulse withstand voltage:
0.8
Rated insulation voltage:
32 VDC
Rated operating current (safety outputs):
250
Reaction time, maximum:
150
Recommendation (actuator):
MZM 100-B1.1
Relative humidity, maximum:
95
Relative humidity, minimum:
30
Required rated short-circuit current to EN 60947-5-1:
100
Resistance to vibrations to EN 60068-2-6:
10 … 150 Hz, amplitude 0.35 mm
Restistance to shock:
30 g / 11 ms
Safety Integrity Level (SIL), applicable for:
3
Short circuit detection:
Yes
Short-circuit recognition:
Yes
Standards:
IEC 61508; EN 60947-5-1; IEC 60947-5-3
Storage and transport temperature, maximum:
85
Storage and transport temperature, minimum:
-25
Switching frequency, maximum:
1
Switching thresholds of fail-safe inputs:
−3 V … 5 V (Low); 15 V … 30 V (High)
Switching thresholds of magnet inputs:
-3 V … 5 V (Low); 15 V … 30 V (High)
Terminal Connector:
Connector M23, 8+1-pole
Time to readiness, maximum:
4000
Traceparts, external ID:
69-05102007-016632
Traceparts, product ID:
69-05102007-016632
Voltage drop Ud, maximum:
4
Voltage, Utilisation category DC13:
24
Safety-relevant key characteristics
Housing
ambient conditions
protection class:
IP 67 to IEC/EN 60529
