office@sensodata.ro 0040730916242 /

  • Nu esti logat

    Intra in cont

    • Coșul este gol!

OptoPulse® - EIL580-SQ

Encoder incremental

Producător: Baumer Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Size ø58 mm
  • Precise optical sensing
  • Output signal level TTL or HTL
  • Square flange 2.5" (63.5 mm)
  • Connection axial, radial or tangential
  • Pulses per revolution up to 5000
  • High protection up to IP 67
  • High resistance to shock and vibrations

Technical data - electrical ratings

Voltage supply:
5 VDC ±5 %
8...30 VDC
4.75...30 VDC

Consumption w/o load:
≤70 mA

Reverse polarity protection:
Yes

Pulses per revolution:
100 … 5000

Short-circuit proof:
Yes (HTL)
Yes (TTL, max. 1 s and 1 signal)

Phase shift:
90 ° ±10°

Reference signal:
Zero pulse, width 90° ±10 %

Duty cycle:
40…60 %

Sensing method:
Optical

Interference immunity:
DIN EN 61000-6-2

Emitted interference:
DIN EN 61000-6-3

Output signals:
A+, B+, R+, A-, B-, R-

Output frequency:
≤300 kHz (TTL)
≤160 kHz (HTL)

Output stages:
TTL/RS422
HTL/push-pull

Approval:
UL 508 / CSA 22.2

Technical data - mechanical design

Size (flange):
2.5 x 2.5" (63.5 x 63.5 mm)

Shaft type:
ø10 x 20 mm, solid shaft with flat
ø3/8" x 4/5" (ø9.525 x 20.32 mm), solid shaft with flat

Flange:
Square flange 2.5" (63.5 mm)

Protection DIN EN 60529:
IP 65 (without shaft seal)
IP 67 (with shaft seal)

Operating speed:
≤6000 rpm (+20 °C, IP 67)
≤12000 rpm (+20 °C, IP 65)

Starting torque:
≤0,015 Nm (+20 °C, IP 65)
≤0,02 Nm (+20 °C, IP 67)

Admitted shaft load:
≤40 N axial
≤80 N radial

Material:
Housing: aluminium die-cast
Flange: aluminium
Solid shaft: stainless steel

Operating temperature:
-40...+85 °C

Relative humidity:
90 % non-condensing

Resistance:
DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz
DIN EN 60068-2-27 Shock 300 g, 6 ms

Weight approx.:
370 g

Connection:
Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cable

Data sheet

Data sheet – EIL580-SQ - FR Descarca
Data sheet – EIL580-SQ - DE Descarca
Data sheet – EIL580-SQ - EN Descarca

Installation and operating instructions

EIL580 - DE/EN/FR/IT/ES Descarca

Certificates / approvals

UL certificate E240061 - EN Descarca

Brochures / Catalogs

EIL580 - FR Descarca
EIL580 - DE Descarca
EIL580 - EN Descarca

3D CAD

EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M23 radial, IP65 / STEP (EIL580-SQ10.5Fx.xxxxx.A) - STEP Descarca
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M23 axial, IP67 / STEP (EIL580-SQ10.7Dx.xxxxx.A) - STEP Descarca
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M23 axial, IP65 / STEP (EIL580-SQ10.5Dx.xxxxx.A) - STEP Descarca
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M12 radial, IP67 / STEP (EIL580-SQ10.7Bx.xxxxx.A) - STEP Descarca
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M12 radial, IP65 / STEP (EIL580-SQ10.5Bx.xxxxx.A) - STEP Descarca
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M12 axial, IP67 / STEP (EIL580-SQ10.7Ax.xxxxx.A) - STEP Descarca
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M12 axial, IP65 / STEP (EIL580-SQ10.5Ax.xxxxx.A) - STEP Descarca
EIL580-SQ10: Square flange, solid shaft ø10 mm, cable tangential, IP67 / STEP (EIL580-SQ10.7Px.xxxxx.A) - STEP Descarca
EIL580-SQ10: Square flange, solid shaft ø10 mm, cable tangential, IP65 / STEP (EIL580-SQ10.5Px.xxxxx.A) - STEP Descarca
EIL580-SQ10: Square flange, solid shaft ø10 mm, cable radial, IP67 / STEP (EIL580-SQ10.7Rx.xxxxx.A) - STEP Descarca
EIL580-SQ10: Square flange, solid shaft ø10 mm, cable radial, IP65 / STEP (EIL580-SQ10.5Rx.xxxxx.A) - STEP Descarca
EIL580-SQ10: Square flange, solid shaft ø10 mm, cable axial, IP67 / STEP (EIL580-SQ10.7Tx.xxxxx.A) - STEP Descarca
EIL580-SQ10: Square flange, solid shaft ø10 mm, cable axial, IP65 / STEP (EIL580-SQ10.5Tx.xxxxx.A) - STEP Descarca
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M23 radial, IP67 / STEP (EIL580-SQ10.7Fx.xxxxx.A) - STEP Descarca

Declaration of conformity

Incremental encoders EIL580-, HS35-, ITD2x-, ITD3-, ITD4x-, ITD6x-, ITD70-, TIL- series and ITD- combination - DE/EN/FR Descarca

Connectors and cables

Connection cable 2 m shielded with female connector M12, 8-pin, straight (ESG 34FH0200G)
10127844
Connection cable 2 m shielded with female connector M12, 8-pin, angled (ESW 33FH0200G)
11053961
Connection cable 5 m shielded with female connector M12, 8-pin, angled (ESW 33FH0500G)
11053962
Connection cable 10 m shielded with female connector M12, 8-pin, angled (ESW 33FH1000G)
10170054
Connection cable 5 m shielded with female connector M12, 8-pin, straight (ESG 34FH0500G)
10129332
Connection cable 10 m shielded with female connector M12, 8-pin, straight (ESG 34FH1000G)
10129333
OptoPulse® - Female connector M23, 12-pin, CW, with cable 1 m
11095302
OptoPulse® - Female connector M23, 12-pin, CW, with cable 2 m
11100408
OptoPulse® - Female connector M23, 12-pin, CW, with cable 5 m
11100430
OptoPulse® - Female connector M23, 12-pin, CW, with cable 10 m
11100431

Mounting accessories

Spring washer coupling D1=6 / D2=10 (Z 121.C01)
10141132
Spring washer coupling D1=10 / D2=10 (Z 121.C03)
10141133
Spring washer coupling D1=10 / D2=16 (Z 121.C04)
11034138
Spring washer coupling D1=10 / D2=14 (Z 121.C06)
11034140
Spring washer coupling D1=10 / D2=12 (Z 121.C07)
11034141
Double loops coupling D1=10 / D2=10
11101781
Bellows coupling aluminium/stainless steel D1=06 / D2=10
11050507
Coupling CPS25 L=19 d1=04/d2=10
11065915
Coupling CPS25 L=19 d1=07/d2=10
11065918
Coupling CPS25 L=19 d1=08/d2=10
11065920
Coupling CPS25 L=19 d1=09/d2=10
11065921
Coupling CPS25 L=19 d1=10/d2=06
11065922
Coupling CPS25 L=19 d1=10/d2=10
11065923
Coupling CPS25 L=19 d1=10/d2=11
11065924
Coupling CPS25 L=19 d1=10/d2=12
11065925
Acorda o nota:

Parteneri

Consultanta gratuita
Transport unic
Achizitie prin sicap
Tehnologii pentru industrie
Politica magazinului privind modulele cookie
Confidentialitate Termeni si conditii