• Nu esti logat

    Intra in cont

OptoPulse® - EIL580P-B


Encoder incremental


Producător: Baumer Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Size ø58 mm
  • Precise optical sensing (interpolated)
  • Output signal level programmable (TTL or HTL)
  • Blind hollow shaft, ø8…15 mm
  • Connection axial, radial or tangential
  • Pulses per revolution 1...65536, programmable
  • High protection up to IP 67
  • High resistance to shock and vibrations

Technical data - electrical ratings

Voltage supply:
4.75...30 VDC

Consumption w/o load:
≤70 mA

Reverse polarity protection:
Yes

Pulses per revolution:
1 … 65536

Short-circuit proof:
Yes

Reference signal:
Zero pulse 90° or 180°

Initializing time:
≤30 ms after power on

Duty cycle:
45…55 % typical at 1024, 2048 ppr (further see table Duty cycle)

Sensing method:
Optical

Interference immunity:
DIN EN 61000-6-2

Emitted interference:
DIN EN 61000-6-3

Output signals:
A+, B+, R+, A-, B-, R-

Programmable parameters:
Output level TTL/HTL
Pulse number 1...65536
Zero pulse width 90°/180°
Zero pulse position
Signal sequence

Output frequency:
≤300 kHz (TTL)
≤160 kHz (HTL)

Output stages:
TTL/RS422
HTL/push-pull

Approval:
UL 508 / CSA 22.2

Technical data - mechanical design

Size (flange):
ø58 mm

Shaft type:
ø8...15 mm (blind hollow shaft)
ø9.52 mm (blind hollow shaft)
ø12.7 mm (blind hollow shaft)

Protection DIN EN 60529:
IP 65 (without shaft seal)
IP 67 (with shaft seal)

Operating speed:
≤6000 rpm (+20 °C, IP 67)
≤8000 rpm (+20 °C, IP 65)

Starting torque:
≤0,02 Nm (+20 °C, IP 65)
≤Nm (+20 °C, IP 67)

Material:
Housing: aluminium die-cast
Flange: aluminium

Operating temperature:
-40...+100 °C

Relative humidity:
90 % non-condensing

Resistance:
DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz
DIN EN 60068-2-27 Shock 250 g, 6 ms

Weight approx.:
300 g

Connection:
Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cable

Data sheet

Data sheet – EIL580P-B - DE Descarca
Data sheet – EIL580P-B - EN Descarca
Data sheet – EIL580P-B - FR Descarca

Installation and operating instructions

EIL580 - DE/EN/FR/IT/ES Descarca

Certificates / approvals

UL certificate E240061 - EN Descarca

Brochures / Catalogs

EIL580P Programmable - DE Descarca
EIL580P Programmable - EN Descarca
EIL580P Programmable - FR Descarca

Software

Encoder Software v3.3 05.07.16 - Download Descarca

3D CAD

EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, without stator coupling, IP65 / STEP (EIL580-BN14.5Tx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, without stator coupling, IP67 / STEP (EIL580-BN14.7Tx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, stator coupling, IP65 / STEP (EIL580-BT14.5Tx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, stator coupling, IP67 / STEP (EIL580-BT14.7Tx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Tx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Tx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, without stator coupling, IP65 / STEP (EIL580-BN14.5Rx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, without stator coupling, IP67 / STEP (EIL580-BN14.7Rx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, stator coupling, IP65 / STEP (EIL580-BT14.5Rx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, stator coupling, IP67 / STEP (EIL580-BT14.7Rx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Rx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Rx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, without stator coupling, IP65 / STEP (EIL580-BN14.5Px.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, without stator coupling, IP67 / STEP (EIL580-BN14.7Px.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, stator coupling, IP65 / STEP (EIL580-BT14.5Px.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, stator coupling, IP67 / STEP (EIL580-BT14.7Px.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Px.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Px.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, without stator coupling, IP65 / STEP (EIL580-BN14.5Ax.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, without stator coupling, IP67 / STEP (EIL580-BN14.7Ax.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, stator coupling, IP65 / STEP (EIL580-BT14.5Ax.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, stator coupling, IP67 / STEP (EIL580-BT14.7Ax.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Ax.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Ax.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, without stator coupling, IP65 / STEP (EIL580-BN14.5Bx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, without stator coupling, IP67 / STEP (EIL580-BN14.7Bx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, stator coupling, IP65 / STEP (EIL580-BT14.5Bx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, stator coupling, IP67 / STEP (EIL580-BT14.7Bx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Bx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Bx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, without stator coupling, IP65 / STEP (EIL580-BN14.5Dx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, without stator coupling, IP67 / STEP (EIL580-BN14.7Dx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, stator coupling, IP65 / STEP (EIL580-BT14.5Dx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, stator coupling, IP67 / STEP (EIL580-BT14.7Dx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Dx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Dx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, without stator coupling, IP65 / STEP (EIL580-BN14.5Fx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, without stator coupling, IP67 / STEP (EIL580-BN14.7Fx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, stator coupling, IP65 / STEP (EIL580-BT14.5Fx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, stator coupling, IP67 / STEP (EIL580-BT14.7Fx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Fx.xxxxx.A) - STEP Descarca
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Fx.xxxxx.A) - STEP Descarca

Declaration of conformity

Incremental encoders EIL580-, HS35-, ITD2x-, ITD3-, ITD4x-, ITD6x-, ITD70-, TIL- series and ITD- combination - DE/EN/FR Descarca

Mounting accessories

Connectors and cables

Programming accessories

Acorda o nota:

Parteneri