• Nu esti logat

    Intra in cont

PROTECT-PE-11-SK


PROTECT-PE


Producător: Schmersal Cod produs: 101210945 Disponibilitate: Solicita stoc Cantitate disponibila: 0 buc.
Solicita produs
  • Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
  • Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
  • 2 safety contacts
  • Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
  • Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
  • 2 safety contacts
  • Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)

Caracteristici

Ambient temperature, maximum:
55

Ambient temperature, minimum:
-25

Automatic reset function:
Yes

Basic quantity unit:
Piece

Cable section, maximum:
1.5 mm²

Cable section, minimum:
0.14 mm²

Certificates:
CCC; cULus; EAC

Climatic stress:
EN 60068-2-78

Common Cause Failure (CCF), minimum:
65

Conduction resistance, maximum:
40

Contact resistance, maximum:
0.1

Control category to EN13849:
3

Current, Utilisation category DC12:
0.1

Current, Utilisation category DC13:
2

Degree of pollution to VDE 0110:
2

Diagnostic Coverage (DC) Level:
60

Drop-out delay in case of "emergency stop", maximum:
10

Drop-out delay in case of power failure, maximum:
60

Earth connection detection:
Yes

eCl@ss number, Version 9.0:
27-37-18-19

Electrical power consumption:
1.7

Electronic Fuse:
Yes

EMC rating:
EMC-Directive

Enclosure material:
Glass-fibre reinforced thermoplastic, ventilated

Gross weight:
160.000

Height:
126

Indicated operating states:
Position relay K3; Position relay K2; Position relay K1; Internal operating voltage U<sub>i</sub>; Position relay K3

Input resistance at GND:
2900

Input resistance at Ue:
2900

Input signal, HIGH Signal "1":
19 - 28,8 VDC

Input signal, LOW Signal "0":
0 - 1 VDC

Integral System Diagnostics, general:
Yes

Mechanical life, minimum:
10000000

Mission Time:
20

Mounting:
Snaps onto standard DIN rail to EN 60715

Net weight:
160.000

Note (applications):
Safety sensor; Guard system; Emergency-Stop button; Pull-wire emergency stop switches; Safety light curtain

Note (Contact resistance):
in new state

Number of auxiliary contacts:
2; 9

Number of LEDs:
6

Number of openers:
1

Number of shutters:
1

Number of signalling outputs:
7

Overvoltage category:
III

Performance level, up to:
d

PFH-value:
0.0000002

Product group:
Initial

Product name:
PROTECT-PE

Protection class of Clips or Terminals:
IP20

Protection class of the Clearance:
IP20

Protection class of the enclosure:
IP20

Pull-in delay at automatic start, maximum, typically:
10

Rated AC voltage for controls at DC minimum:
21.1

Rated AC voltage for controls, 50 Hz, minimum:
21.1

Rated AC voltage for controls, 60 Hz, minimum:
21.1

Rated control voltage at AC 50 Hz, maximum:
26.4

Rated control voltage at AC 60 Hz, maximum:
26.4

Rated control voltage at DC, maximum:
28.8

Rated impulse withstand voltage:
4

Rated operating voltage:
24 VDC -15% / +20%, residual ripple max. 10 %

Removable Terminals:
Yes

Resistance to vibrations to EN 60068-2-6:
10...55 Hz, Amplitude 0.35 mm, ± 15 %

Restistance to shock:
30 g / 11 ms

Safety Integrity Level (SIL), applicable for:
2

Short-circuit recognition:
Yes

Standards:
IEC 61508; EN 60947-5-1

Storage and transport temperature, maximum:
85

Storage and transport temperature, minimum:
-40

Switching capacity, maximum:
24

Switching capacity, minimum:
10

Terminal Connector:
Screw connection, plug-in

Terminal designations:
IEC/EN 60947-1

Tightening torque of Clips:
0.6

Voltage, Utilisation category DC12:
24

Voltage, Utilisation category DC13:
24

Width:
65.5

Wire breakage detection :
Yes

Housing

Weight:
220

mechanical data

depth:
61

Acorda o nota:

Parteneri