Caracteristici
Ambient temperature, maximum:
55
Automatic reset function:
Yes
Basic quantity unit:
Piece
Cable section, maximum:
2.5 mm²
Climatic stress:
EN 60068-2-3; BG-GS-ET-14
Conduction resistance, maximum:
40
Contact resistance, maximum:
0.1
Control category to EN13849:
1
Current, Utilisation category AC-15:
1.5
Current, Utilisation category DC12:
0.1
Current, Utilisation category DC13:
1
Degree of pollution to IEC/EN 60664-1:
2
Drop-out delay in case of emergency, typically:
20
Drop-out delay in case of power failure, typically:
80
EAN ( European Article Number):
4030661059129
EAN (European Article Number):
4030661059129
eCl@ss number, Version 9.0:
27-37-18-19
Electrical power consumption:
2.4
EMC rating:
EMC-Directive
Enclosure material:
Glass-fibre reinforced thermoplastic, ventilated
Indicated operating states:
Authorised operation
Integral System Diagnostics, status :
Yes
Material of the contacts, electrical:
AgCdO
Mechanical life, minimum:
3000000
Mounting:
Snaps onto standard DIN rail to EN 60715
Note (applications):
Safety sensor; Guard system
Note (Contact resistance):
in new state
Note (General):
Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit.
Note (Wiring diagram):
To secure one or a number of guard doors up to PL c and Category 1; Monitoring a number of guard doors using magnetic safety sensors BNS range; The wiring diagram is shown with guard doors closed and in de-energised condition.
Notice:
for max. 50,000 switching cycles/year and max. 80% contact load
Number of safety contacts:
1
Overvoltage category:
III
Performance level, up to:
c
Product type description:
AES 1102.1
Protection class of Clips or Terminals:
IP20
Protection class of the Clearance:
IP54
Protection class of the enclosure:
IP40
Pull-in delay at automatic start, maximum, typically:
100
Pull-in delay at RESET, typically:
20
Rated AC voltage for controls, 50 Hz, minimum:
93.5
Rated AC voltage for controls, 60 Hz, minimum:
93.5
Rated control voltage at AC 50 Hz, maximum:
121
Rated control voltage at AC 60 Hz, maximum:
121
Rated impulse withstand voltage:
4
Rated operating voltage:
110 V
Reset after disconnection of supply voltage :
Yes
Resistance to vibrations to EN 60068-2-6:
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Restistance to shock:
30 g / 11 ms
Safety Integrity Level (SIL), applicable for:
1
Standards:
IEC 61508; ISO 13849-1
Storage and transport temperature, maximum:
70
Storage and transport temperature, minimum:
-25
Switching capacity, maximum:
250
Switching capacity, minimum:
10
Terminal Connector:
Screw connection; rigid or flexible
Terminal designations:
IEC/EN 60947-1
Tightening torque of Clips:
0.6
Voltage, Utilisation category AC15:
250
Voltage, Utilisation category DC12:
24
Voltage, Utilisation category DC13:
24
Wire breakage detection :
Yes
Housing
mechanical data
