Caracteristici
Ambient temperature, maximum:
55
Automatic reset function:
Yes
Basic quantity unit:
Piece
Cable section, maximum:
1.5 mm²
Conduction resistance, maximum:
40
Contact resistance, maximum:
0.1
Control category to EN13849:
3
Current, Utilisation category AC-15:
2
Current, Utilisation category DC12:
0.1
Current, Utilisation category DC13:
2
Degree of pollution to IEC/EN 60664-1:
2
Drop-out delay in case of emergency, typically:
20
Drop-out delay in case of power failure, typically:
80
EAN ( European Article Number):
4030661058474
EAN (European Article Number):
4030661058474
eCl@ss number, Version 9.0:
27-37-18-19
Electrical power consumption:
1.5
EMC rating:
EMC-Directive
Enclosure material:
Glass-fibre reinforced thermoplastic, ventilated
Indicated operating states:
Authorised operation
Integral System Diagnostics, status :
Yes
Material of the contacts, electrical:
AgSn0
Mechanical life, minimum:
3000000
Mounting:
Snaps onto standard DIN rail to EN 60715
Note (applications):
Safety sensor; Guard system
Note (Contact resistance):
in new state
Note (General):
Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit.
Note (Wiring diagram):
The wiring diagram is shown with guard doors closed and in de-energised condition.; Monitoring 1 guard door(s), each with a magnetic safety sensor of the BNS range; Monitoring further guard doors: Further magnetic safety sensors can be connected to S2 in a similar way to those on S1.; To secure a guard door up to PL c and Category 1
Notice:
for max. 50,000 switching cycles/year and max. 80% contact load
Number of safety contacts:
1
Overvoltage category:
III
Performance level, up to:
d
Product type description:
AES 7112.2
Protection class of Clips or Terminals:
IP20
Protection class of the Clearance:
IP54
Protection class of the enclosure:
IP40
Pull-in delay at automatic start, maximum, typically:
100
Pull-in delay at RESET, typically:
20
Rated AC voltage for controls, 50 Hz, minimum:
195.5
Rated AC voltage for controls, 60 Hz, minimum:
195.5
Rated control voltage at AC 50 Hz, maximum:
253
Rated control voltage at AC 60 Hz, maximum:
253
Rated impulse withstand voltage:
4
Rated operating voltage:
230 VAC
Reset after disconnection of supply voltage :
Yes
Resistance to vibrations to EN 60068-2-6:
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Restistance to shock:
30 g / 11 ms
Safety Integrity Level (SIL), applicable for:
2
Short-circuit recognition:
Yes
Standards:
IEC 61508; ISO 13849-1
Storage and transport temperature, maximum:
70
Storage and transport temperature, minimum:
-25
Switching capacity, maximum:
250
Switching capacity, minimum:
10
Terminal Connector:
Screw connection; rigid or flexible
Voltage, Utilisation category AC15:
250
Voltage, Utilisation category DC12:
24
Voltage, Utilisation category DC13:
24
Wire breakage detection :
Yes
Housing
mechanical data
